Speaker Problem 

 
It is really frustrating if there's no sound coming from your iPhone. The symptoms of iPhone no sound problem/issues includes iPhone will ring but speaker will not work for anything else, no sound at all for calls, apps, music etc. Or no sound as stuck in headphone mode 

The following are some helpful steps for your speaker problem and hopefully your iPhone will be back to its prior glory. 

๐Ÿ”‡No Sound Step 1: 
Loud/ Silent switch on exterior of iPhone is switched to silent mode which is orange. If so flick the other way to loud mode.  

๐Ÿ”‡No Sound Step 2: 
Restart the iPhone. If there is a temporary glitch on the iPhone this will eliminate that glitch. 

๐Ÿ”‡No Sound Step 3: 
Reset iPhone. This will not loose any data, media contacts etc. It will also eliminate the glitch on the iPhone. 

๐Ÿ”‡No Sound step 4: 
To eliminate this glitch go into settings then put air plane mode on for about 5 minutes. After that is done toggle air plane mode on and off for 1 minute. Then restart the iPhone by pressing the home and power button at the same time for 10 seconds. 

๐Ÿ”‡iPhone No Sound step 5, 
Squeeze the bottom right hand corner of the iPhone between your two fingers for about 20 seconds at a time. By doing this you may reconnect the speaker connectors which may have disconnected. 

๐Ÿ”‡No Sound step 6: 
Use a toothbrush or a similar item with stiff plastic bristles, once you have found one clean the docking/ charging port of the iPhone. This will remove or dislodge any dirt/ grime/ dust/ sand etc from the port.  

๐Ÿ”‡No Sound step 7: 
Insert your headphones in then remove them straightaway. Sometimes when headphones are inserted but not removed correctly the iPhone will still play sound through that audio source which isnโ€™t present 

๐Ÿ”‡No Sound step 8: 
Toggling the iPhone bluetooth switch will eliminate any temporary glitches. By going into Settings > Bluetooth > Toggle on and off for 30 seconds. Sometimes, spawning between bluetooth audio sources such as music docks or car speakers can cause some glitches when reverting back to the iPhone speakers. 

๐Ÿ”‡No Sound step 9: 
Humidity, moisture or water may be the cause of no sound or volume coming through on your iPhone. To remove the moisture you can put your iPhone in a container of rice for 24 hours. Make sure that the iPhone is turned off and the sim card is removed before doing this. 

๐Ÿ”‡No Sound step 10, 
Similar to the step 9, you can get a hairdryer and then apply heat to the iPhone in the bottom right hand corner where the speakers is located. Have the hairdryer on the lowest heat setting and at a fair distance so the iPhone doesnโ€™t overheat. Repeat this step several times.